- Allow your car to run for a little bit before checking it- Checking your oil "cold" can give off an inaccurate reading. It is essential to allow the oil to circulate and warm up before checking it.
- Always check your oil with your car off- With your car not running, oil has time to settle at the bottom of the oil pan, which is most accurate way of reading your oil dipstick.
- Make certain your car is on a level surface- If your car is on a slope, the oil level will not be "flat," thus giving an inaccurate reading on the dipstick.
- When taking out the dipstick, do not tip it upside down- Bring the dipstick straight out of the tube, and make sure the bottom of the stick faces down. Flipping it upside down can cause the oil to run, giving an inaccurate reading.
- Find the two dots/dashes- Most dipsticks have a low/high level represented by two dots, or dashes on the stick.
- Add oil accordingly- If your oil is below the "low" level, try to add half a quart of oil. Once this is done, check the oil again to see where the level is at, repeat this process until it is between the two dots.
Typically, when the level is below the "low" dot, it will take approximately 1 quart of oil to get it back to the "full" level. Every car is different however, and you should be cautious not to overfill your oil when you are adding oil. A common misconception about oil is that if it is dark in color, it is dirty, which means it needs to be changed. Color has little to do with the condition of the oil, you should always go off of your mileage when thinking about when you should get it changed next. Take advantage of the coupon at the bottom of this blog to get $5 off any oil change at your local Bob Sumerel Tire!
Please visit us on Facebook, Twitter, Google+, and Yelp.
No comments:
Post a Comment